Pro Mini 328 - 3.3V/8MHz Soldered:With Soldered Pin run at 80 MHz and

run at 80 MHz and 160 MHz frequency

Stall Torque @4

the length of the line

Sort of like a very short range bluetooth that doesn't require authentication

1% resistor as a reference resistor on the breakout is used

Pro Mini 328 - 3.3V/8MHz Soldered:With Soldered Pin run at 80 MHz andThe Arduino Pro Mini is a 3. 3V Arduino running the 8MHz bootloader. Arduino Pro Mini does not have connectors populated, so you can solder in any connector or wire with any orientation you need. We recommend first time Arduino users start with the Uno R3. Its a great board that will get you up and running quickly. The Arduino Pro series is meant for users that understand the limitations of system voltage (3. 3V), lack of connectors, and USB off