SMC CRA1 Series Rotary Actuator Rack and Pinion Type, CRA1FS80-100CZ Combi Hammer 5028 Outer Ring Width 30

5028 Outer Ring Width 30

The N°06 is the smallest Opinel with Virobloc double safety ring

Cr C0r Grease Oil 6310 50 110 27 2 62 38

NSK Deep Groove Ball Bearings 6808

due to contact seal   Speed capability  Good Good Limited by contact seals  Grease-sealing effectiveness  Good Better than ZZ type  Slightly better than VV type  Dust resistance Good Better than ZZ type (usable in moderately dusty environments) Best (usable even in very dusty environments)  Water resistance Not suitable Not suitable Good (usable even if fluid is splashed on bearing)   Operating temperature –10 to +110 °C –10 to +110 °C –10 to +110 °C   Note (1) The above temperature range applies to standard bearings

SMC CRA1 Series Rotary Actuator Rack and Pinion Type, CRA1FS80-100CZ Combi Hammer 5028 Outer Ring Width 30OVERVIEW The CRA1 rack & pinion rotary actuator offers very high torque to size and accurate positioning. Bore sizes are 30, 50, 63, 80 and 100mm. Units may be ordered auto switch capable and with cushions. Dimensions range from 3" X 4" X 2" to a maximum of 8" X 9. 65" X 4. 41". Single shaft end or double shaft end models are available. Can be mounted on 2 sides of a small auto switch ( D M9?? span> type ) Can be mounted from the front of the auto